Ornamental lock with aluminum housing and stainless steel mechanism. We recommend this lock as the standard for your ornamental gates as it only requires a 3-3/8'' spacing to the first picket and will fit nicely into most gates.
The latch and dead bolt have 3/8'' continuous adjustment to allow perfect alignment of the locking mechanism. A stainless steel throw of 7/8'' guarantees secure locking.
Ships standard with the black zamac ornamental handle pair. The latch gap required is keeper dependent, but the standard and security keepers require a 1-1/4'' latch gap.
It is suitable for square tubes 40 to 50mm (1''1/2 to 2'') (see footnote on record)
Optional drilling template see item FN3723.
Strike Plate with counter-lockbox in option see item FN3726.

Characteristics :

• Easy left or right hand changing of the self-latching bolt
• Throw of 7/8'' in 1 turn of the key
• Adjustment of the bolts up to 3/8'' continuous without removing the lockbox
• Key-operated self-latching bolt
• 4-hole mounting with two hex head socket screws
• Center distance between bolts: 2-3/8''

This article is sold individually or has a volume discount.
This is held in permanent stock in Alum no paint and requires a small period of 2 weeks to be delivered in the color of your choice,

• Raw aluminium ZILV
• Green - RAL6005
• Dark green - RAL6009
• Black - RAL9005
• White - RAL9010

Note :
This lock is held in stock with a bolt corresponding to a square tube in the amount of 40 to 50mm (1''1/2 to 2'') It can be supplied on request (within 2 weeks) for tubes other sections at the same price.
When ordering, mention your profile section in the box observation.

• Square of 30 to 40mm (1''1/4 to 1''1/2'')
• Square of 40 to 50mm (1''1/2 to 2'')
• Square of 40 to 60mm (1''1/2 to 2''3/8)
• Round of Ø30 to 40mm (1''1/4 to 1''1/2)
• Round of Ø40 to 50mm (1''1/2 to 2'')
• Round of Ø 50 to 60mm (2'' to 2''3/86)
• Flat of 10 to 20mm ( 3/8'' to 3/4'')

[FN3716]  Detail